Quote:
Originally Posted by HawaiiYurts
I've been checking out the Floorplan software, can anyone give me the clue on how to draw the initial circle there? Mahalo!
|
Hi Melissa..........first off, thank you very much for all your knowledgeable contributions here.
What I did, and haven't seen a better way after reading the manual:
Set easy to work w grid settings via the WRENCH icon, upper right, the bottom line is Grid settings ( 5 and 5 works well).
Using the WALL tool (3rd from left in the construction box) create a square rotated 45*, the diagonal being the diameter of the yurt (see attachment for 30'yurt).
Click on a wall
Click the Info Button "I"
Select WALL in the dropdown
Click the curved icon, top right
You can now curve each wall to create a round shape, the gridlines will help you keep the cursor in the middle of the wall as you curve it, get the numbers the same for each wall,think it is 23.55' (30x3.14/4) for a 30' yurt, (see attachment) , enlarging the view will help w this step.
Sounds complicated, but if you take it step by step, I think it should be straightforward, ask again if it's not clear.
Good luck and again thanks for your contributions here